The issue I am having is this:
I am only getting one channel (left) on output in SAM. this is the case when either LIVE or RECORD. I have gone through all manufactures manuals, numerous forums and you-tubes. I have even consulted with a Certified Audio Engineer and can not seem to find the resolution.
The "Audio Mixer Pipeline" tube settings in SAM are as follows: VoiceFX is currently through the "Mixer". I have sent it through the "Encoders" as well with no change in output, still left channel only.
Background of Equipment:
OS: Windows 7 Professional
Processor: Intel Core i7-2600 CPU @ 3.40GHz
RAM: 32.0 GB
Sys Type 64-bit OS
Microphone: Rode, NTK (with Power Supply) attached to a Focusrite, Scarlett 18i8 then to the PC via USB. (The Mic is the only instrument plugged into the 18i8)
Focusrite, Scarlett MixControl: *NOTE* The Focusrite software indicates 2 channel output (L&R)
SAM Broadcaster PRO 2015.5
Any assistance would be most helpful.